1. Plug your camera into the power socket and internet socket, with the 2 receiver wires from the camera.

2. Click the plus sign in the top right corner.

3. Tap on "Add Device."

4. Scroll down to "Camera & Lock."

5. Select your camera.

6. Tap in the top right corner at "QR Code for Camera" and change to "Cable."

7. Reset your camera by holding the button in the 3rd socket from the camera for 5 seconds until it makes a sound. Then press "Next."

8. Tap "Next" again.

9. Tap "Done" in the last step, and your camera is connected.